KEYSIGHT 10469A 5 Volt PECL Data Pod-uses the 10498A Lead Set

Category: Adapters and Connectors

Quick Overview:

Product Details

Data Pod Configuration

Logic level support: 5 V PECL
Recommended lead set: Keysight 10498A
Order at least one data pod for every 8 output channels
Design in a dedicated header for pod connection or order one 8-channel lead set for each pod

Features

Maximum clock: 300 MHz
Skew: Typical less than 500 ps; worst case = 1 ns
Output type: 100EL90 (5 V) with 348 ohm pulldown to ground and 42 ohm in series

Each Keysight 16720A pattern generator module needs one clock pod and up to four data pods. Each data pod provides eight output channels. Order 1 to 4 sets where a set is (1) of these 8-Channel data pods + (1) 10498A lead set.

See product literature, ''Keysight 1670G Series Benchtop Logic Analyzers.''

Output Type: 100EL90 (5 V) with 348 pulldown to ground and 42 in series
Maximum clock: 300 MHz
Skew^{note 1}: typical <500 ps; worst case = 1 ns
Recommended lead set: Keysight 10498A
Note 1: Typical skew measurements made at pod connector with approximately 10 pF/50 k load to GND; worst case skew numbers are a calculation of worst case conditions through circuits.