COMET M1322 Ethernet Multilogger - thermo-hygro-CO2 meter with 2 MiniDIN and 2 Terminals


Category: Data Loggers

Quick Overview:

Product Details

Battery powered datalogger with built-in CO2 sensor and 4 universal inputs for measurement of temperature, humidity, 0-10V voltage, 0-20mA current, two-state signal and for counting pulses.
Multilogger can be installed permanently to Ethernet network or work as portable device.
Included is traceable calibration certificate in accordance with EN ISO/IEC17025.

The device is designed for measuring and recording temperature, humidity, CO2 (internal sensor) with adjustable recording intervals from 1 second to 24 hours.

Datalogger can be connected to Ethernet. Then measured values can be viewed on a web browser, as well as stored and downloaded for later analysis.

  • on-line monitoringcarbon dioxide
  • recording of data
  • alarm warnings
  • Code
    M1322
  • Warranty
    3 years


    TECHNICAL DATA

    MEASURED VALUE

    Temperature
    Relative humidity
    Counted values (dew point…)
    CO2
    Current
    Voltage
    Two-state signal
    Pulses

    TEMPERATURE SENSOR - EXTERNAL PROBE PT1000

    Measuring range -200 to +600 °C
    Accuracy ±0.2 °C (-200 to +100 °C);
    ±0.2 % from reading from +100 to +600 °C
    Resolution 0.1 °C

    TEMPERATURE+HUMIDITY SENSOR - EXTERNAL PROBE T+RH DIGI

    Measuring range according to the connected probe Digi/M
    Accuracy according to the connected probe Digi/M
    Resolution 0.1 °C

    DEW POINT

    Measuring range according to the connected probe Digi/M
    Accuracy according to the connected probe Digi/M
    Resolution 0.1 °C

    CO2 SENSOR

    Measuring range 0 to 2 000 ppm
    Accuracy 50 ppm + 2 % of the measured value at 23 °C a 1013 hPa
    Resolution 1 ppm
    DC VOLTAGE
    Measuring range 0 to 10 V
    Accuracy ±10 mV
    Resolution better than 100 µV

    DC CURRENT

    Measuring range 0 to 20 mA
    Accuracy ±20 µA
    Resolution better than 0,1 µA

    BINARY SIGNAL

    Input voltage for level “switched on”/ <0,4 V/> 2 V
    Minimum/maximum input voltage 0 V/+30 V DC
    I mpedance of the “switched on”/ < 10 kOhm/> 300 kOhm

    COUNTER INPUT

    Range of counter 24 bit (16 777 215) the counter overflow can be allowed
    Maximum input frequency 200 Hz

    GENERAL TECHNICAL DATA

    Operating temperature -10 to +60 °C
    Channels internal CO2 sensor, 2x external temperature probe or connectable temperature+humidity probe,
    2x binary, counter, voltage and current input
    Counted values dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy
    Memory 1 000 000 values (noncyclic record), 600 000 values (cyclic record)
    Recording interval 1s to 24 hours
    Display and alarm refresh each 10 s
    Recording mode noncyclic - data logging stops after filling the memory
    cyclic - after filling memory oldest data is overwritten by new
    Available temperature units degrees Celsius, degrees Fahrenheit
    Communication interface Ethernet, USB, RS232
    Ethernet communication protocols WWW, SNMPv1, XML, DATALINK
    Alarm protocols E-Mail
    Power AC adapter 230Vac/5Vdc (neccessary for Ethernet interface)
    Battery life 3 - 4 weeks
    Protection class IP20
    Dimensions (without connectors) 178 x 95 x 37mm, without attached cables
    Weight (including batteries) approx. 380 g
    Warranty 3 years
  •  

Share: Messenger


Sorry, Currently No Product Description.

Sorry, Currently No Video Uploaded.
Sorry, Currently No File Uploaded.

COMET M1322 Ethernet Multilogger - thermo-hygro-CO2 meter with 2 MiniDIN and 2 Terminals


Please Leave Your Product Enquiry Here. We will Get Back To You Soon.

Product Specifications

  • Product SKU : -
  • Weight (GRAM) : -
  • Dimension : -

Locate Us